Tokyo Electric Power Company says contaminated water is pouring from Reactor 1.  This after workers were finally able to enter the building and check gauges.  The gauges showed that despite hundreds of tons of water being injected, the water levels were low.

TEPCo suspected faulty gauges. Workers checked the gauges again, after more water was pumped in, and they discovered the water levels actually dropped.

Now officials are worried that the water could be pouring from a hole in the reactor itself.  When checked on the morning of 12 May, workers discovered the fuel rods fully exposed.   Water levels are a full meter (3.2 feet) below the rods!

TEPCo is pumping in water, but the Nuclear and Industrial Safety Agency believes rods have started melting.